|
Your goal here is to reduce absorption of EMF from plug in electric devices, especially those with strong EMF output, and that are used in close proximity to your body. These include : |
|
- Microwave ovens - Wireless/WiFi routers - PC / Desktop computers
- Computer monitors - Televisions - Electric hair dryers
- Multiple outlet power strips / surge protectors
- Computer monitors - Televisions - Electric hair dryers
- Multiple outlet power strips / surge protectors
How To Apply The Harmonic Shield To Your Electrical Plug In Devices
- Prepare the surface your patch will be applied, so that it’s thoroughly clean and dry.
- Select the place on your device where you’ll apply the patch. For best results this will be as close as possible to where the power cord enters the device.
- A word about curved surfaces : The Harmonic Shield has some flexibility, but can't bend both top to bottom and left to right, and still be expected to stick. If the surface you will apply your patch to is curved - for instance the surface of a WiFi router – you’ll achieve the best “stick” by cutting the patch in half before removing the backing. Apply the two halves separately to those places where the surface is least curved. Observe your device and make this decision before you start
- Carefully remove the adhesive backing of The Harmonic Shield
- Apply the patch to the selected place on your device, and smooth down firmly for a full and complete contact - and believe it or not, you’re done ! For EMF protection purposes, just one Harmonic Shield patch is needed per device
When protected from dampness and friction by your device protective case or battery compartment cover, the adhesive backing of your patch should last two years – and possibly considerably longer. If the adhesive should fail entirely before two years when applied this way, return it via our service website and we’ll replace it. Please note that the propriety formulation of minerals in The Harmonic Shield does not wear out – their properties and effects are permanent !
The Harmonic Shield : Order Here
- Select the place on your device where you’ll apply the patch. For best results this will be as close as possible to where the power cord enters the device.
- A word about curved surfaces : The Harmonic Shield has some flexibility, but can't bend both top to bottom and left to right, and still be expected to stick. If the surface you will apply your patch to is curved - for instance the surface of a WiFi router – you’ll achieve the best “stick” by cutting the patch in half before removing the backing. Apply the two halves separately to those places where the surface is least curved. Observe your device and make this decision before you start
- Carefully remove the adhesive backing of The Harmonic Shield
- Apply the patch to the selected place on your device, and smooth down firmly for a full and complete contact - and believe it or not, you’re done ! For EMF protection purposes, just one Harmonic Shield patch is needed per device
When protected from dampness and friction by your device protective case or battery compartment cover, the adhesive backing of your patch should last two years – and possibly considerably longer. If the adhesive should fail entirely before two years when applied this way, return it via our service website and we’ll replace it. Please note that the propriety formulation of minerals in The Harmonic Shield does not wear out – their properties and effects are permanent !
The Harmonic Shield : Order Here
|
Jeff and Roswitha (Rose) Smith Living Waters Wellness Products (916) 962 2685 service@livingwaterswellnessproducts.com |
